How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: Marine Electronics
Satisfied Customers: 17636
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Marine Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a Furuno RCU-014 unit. I keep getting an alarm which

Customer Question

I have a Furuno RCU-014 unit. I keep getting an alarm which says: System error - video, System error - headline and System error - trigger
When the unit is on an running there is no picture apart from my VRM circles, EBL lines and AIS target triangles. No picture of the coast line or anything.
Any suggestions?
Submitted: 1 year ago.
Category: Marine Electronics
Expert:  Pete replied 1 year ago.

Hi Stefhan,

Customer: replied 1 year ago.
I did not get your reply.. I only see the start of the message "Hi Stefhan"
Expert:  Pete replied 1 year ago.

these errors mean that the unit is not receiving any video, headline or trigger signals.

If it was working ok previously then check the cable connections.
Try removing the cable connections and firmly reconnecting them again.

Let me know if that helps?

Related Marine Electronics Questions