How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: Marine Electronics
Satisfied Customers: 17262
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Marine Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

When fitting a TM260 to an FCV627 which model trany should

Customer Question

When fitting a TM260 to an FCV627 which model trany should I choose on the fcv627 trany scroll down selection list...TM260 isn't listed
And the same for a P66 600W on a 1870F unit...P66 isn't listed either
Regards Rob
Submitted: 2 years ago.
Category: Marine Electronics
Expert:  Pete replied 2 years ago.
Hi Rob,
The TM260 is not listed as compatible with the FCV627.
You can try selecting a similar model, but it may not work for you since Furuno have not confirmed it as compatible or included it in the firmware.
Customer: replied 2 years ago.

The TM260 is compatible with the FVC 627,But will only work to 600W..But will give up to 22 times the clarity of a 600W trany...As for the P66 and the 1870F..its the supplied trany..But not listed on the unit...Go figure.

There must be a Furuno number ie 525TID/TMD etc compatible with the TM260...Its not even listed on Furunos Trany charts..Yet its one of their biggest sellers.

Typical of Furuno

Related Marine Electronics Questions