Marine Electronics
Marine electronics questions? Ask a technician for answers ASAP
Connect one-on-one with {0} who will answer your question
Answered in 13 hours by:
10/12/2011
Jeremy R., Marine Technician
Category: Marine Electronics
Satisfied Customers: 9,023
Experience: 15+ Years of Marine Repair Experience
VerifiedHi, and thank you for letting me try and assist you with your problem.
What are the switches in the back say?
is it 2,4,6,8
or 1234?
What are the switches in the back say?
is it 2,4,6,8
or 1234?
this is for a diesel motor and not a gasoline motor
Jeremy R., Marine Technician
Category: Marine Electronics
Satisfied Customers: 9,023
Experience: 15+ Years of Marine Repair Experience
VerifiedJeremy R. and 87 other Marine Electronics Specialists are ready to help you
the tachs on gasoline motors come form the negative of the coil
the diesel it comes from the alternator
your going to have to play around with it
but the one that says 12345678, you set that on cylinders you have
the other ones your going to have to play around with it
the diesel it comes from the alternator
your going to have to play around with it
but the one that says 12345678, you set that on cylinders you have
the other ones your going to have to play around with it
Jeremy R., Marine Technician
Category: Marine Electronics
Satisfied Customers: 9,023
Experience: 15+ Years of Marine Repair Experience
VerifiedJeremy R. and 87 other Marine Electronics Specialists are ready to help you
How JustAnswer works
Describe your issueThe assistant will guide you
Chat 1:1 with a marine electronics expertLicensed Experts are available 24/7
100% satisfaction guaranteeGet all the answers you need
Related Marine Electronics Questions
I am working on a mercury 100 outboard motor. The charging
My name is***** am working on a mercury 100 outboard motor. The charging system does not seem to working. Where do we start?… read more
Shawn tech
tech.
certified mercury suzuki and evinrude
293 satisfied customers
How to adjust the throttle and shift cables on a gm 3.0 4
how to adjust the throttle and shift cables on a gm 3.0 4 cyl in a party barge with a alpha 1 outdrive… read more
yachtwork
Marine Engineer
223 satisfied customers
I have a 2006 Yamaha 150 hp 4 stroke model F150. Having gas
Hello. I have a 2006 Yamaha 150 hp 4 stroke model F150. Having gas gauge trouble. Is it the sending unit in the tank? Thanks Scotty… read more
Noel Schembri
Marine Technician
Diploma
89 satisfied customers
I would like to wire a tachometer (>5000 rpm) to the
I would like to wire a tachometer (>5000 rpm) to the rectifier of an engine that has an 18 pole stator and 6 magnets. I believe this is similar to how a tachometer is wired to an alternator on a Di… read more
Jason
Marine Mechanic
799 satisfied customers
I have a Yamaha 60hp T60TlRC 4 stroke 2004. It will barely
I have a Yamaha 60hp T60TlRC 4 stroke 2004. It will barely start and very rough idle. Give any gas at all and stalls. I have replaced all four plugs with the correct ones gaped correctly. Take apart a… read more
Charles
Certified Mercury Tech
5,752 satisfied customers
I have a 22.5 Bennington Pontoon boat that I just put a new
I have a 22.5 Bennington Pontoon boat that I just put a new Yamaha F150LB outboard on. I did the break in period at Lake Powell in Utah elevation 3,700 ft. I purchased a prop that was recommended on a… read more
Jason
Marine Mechanic
799 satisfied customers
I have a raymarine ST2 90 autopilot that turns its self
Hi, I have a raymarine ST2 90 autopilot that turns its self to standby about once a day. It is a random event with no error message or sound. It is like somebody has pushed the standby button. Doug… read more
Charles
Certified Mercury Tech
5,752 satisfied customers
I have a a 1984 Wellcraft Nova II that I have been restoring
I have a a 1984 Wellcraft Nova II that I have been restoring over the last several years and just installed a new instrument cluster using all Teleflex Premier Pro gauges. Do the two trim gauges need … read more
Charles
Certified Mercury Tech
5,752 satisfied customers
Hey I have a johnson/evinrude OMC tilt/trim gauge. I want to
hey I have a johnson/evinrude OMC tilt/trim gauge. I want to replace it but all the gauges I see for evinrude motors have the (S) (I) & (G) and the the terminal for the light. On my gauge that is the … read more
Charles
Certified Mercury Tech
5,752 satisfied customers
I have an 88 Sea Ray, I need a wiring diagram for the Tach.
I have an 88 Sea Ray, I need a wiring diagram for the Tach. I have a 4.3 engine in it, the tach is not hooked up and I need a wiring diagram so I can re-wire from the coil.… read more
Jason
Marine Mechanic
799 satisfied customers
I have a Faria tachometer hooked up to my Perkins 55 hp Sailboat
I have a Faria tachometer hooked up to my Perkins 55 hp Sailboat Diesel. The meter is not reading anything at all. How can I find out if it is the instrument, sending device or bad wiring?… read more
Jason
Marine Mechanic
799 satisfied customers
I have an F25TLRW and would like to install a tach. I tried
I have an F25TLRW and would like to install a tach. I tried the Tiny Tach route and was completely dissatisfied. The boat has a new 703 control unit that went in perfectly with no problems. Is there a… read more
KKassel
OWNER
High School or GED
52 satisfied customers
I have a 1988 force 50 hp 2cyl outboard motor i just bought
I have a 1988 force 50 hp 2cyl outboard motor i just bought used , i have it mounted on a 16 ft alunimum boat . it currently has a 10-11 prop on motor . i need to mount and wire a tach to see what the… read more
Scott
Marine technician
Vocational, Technical or Trade Scho
543 satisfied customers
I have an RDp-149/NT connected through a Hub to a DFF1 for
I have an RDp-149/NT connected through a Hub to a DFF1 for my depth finder, The display is getting any data. There is a light on the DFf1 which looks like it is on for 2 seconds, then off for two seco… read more
Ropesmarine
Technician owner of business
Vocational, Technical or Trade Scho
70 satisfied customers
Hello, I have a 1997 Silverline 1700LS bow rider boat with
Hello, I have a 1997 Silverline 1700LS bow rider boat with what I believe to be Teleflex guages. the fuel guage has the numbers CE 80150 printed on the housing along with 056/97/D MADE IN THE USA. I a… read more
Jason
Marine Mechanic
799 satisfied customers
my 94 bass tracker has a 60 hp evinrude 3 cylinder. my problem
my 94 bass tracker has a 60 hp evinrude 3 cylinder. my problem is the tach has never read correct since i bought the rig.i dont think it is the original motor. does it take a special tach for a 3 cyli… read more
Jason
Marine Mechanic
799 satisfied customers
I have a 1987 Mercury 115 hp, 2 cycle, 6 cyl. outboard engine.
I have a 1987 Mercury 115 hp, 2 cycle, 6 cyl. outboard engine. the tach is not fuctioning. it does go to zero when power is turned on. the merc is on an 1987 astroglass 178v bass boat if that help.… read more
Joe
Owner Kingsland Auto & Marine Services
Vocational, Technical or Trade Scho
1,617 satisfied customers
Have a 50 hp Yamaha four stroke to my pontoon boat. Unfastened
Have a 50 hp Yamaha four stroke to my pontoon boat. Unfastened cables from the battery over winter and charged battery. Hooked cables back up but am not getting power to the ignition. Instruments and … read more
Noel Schembri
Marine Technician
Diploma
89 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
JustAnswer in the News:
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
What Customers are Saying:
Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.
Freshfield, Liverpool, UK
This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!
Los Angeles, CA
Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.
Hesperia, CA
I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.
Kernersville, NC
Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.
Woodstock, NY
Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.
Elkton, Maryland
He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.
Dallas, TX
< Previous | Next >
Meet the Experts:
Jason
Marine Mechanic
799 satisfied customers
Degree in Marine Technology, Also Certified with Mercury Marine, MCM, MIE, VP, Yamaha, Honda, Suzuki
Noel Schembri
Marine Technician
89 satisfied customers
Marine mechanic / electrical technician
Neil
Marine Electronics Dealer
76 satisfied customers
NZCE Electronics and Computing
yachtwork
Marine Engineer
223 satisfied customers
Yachtmaster Ocean & MEC3
Aaron M
Marine Electronics Installer
48 satisfied customers
Expert
Captain Nick
Boat Builder
40 satisfied customers
Expert
Anthony
Captain
39 satisfied customers
Expert
< Previous | Next >
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
