How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Amedee Your Own Question
Amedee
Amedee, Lexus Technician
Category: Lexus
Satisfied Customers: 26076
Experience:  ASE certified tech advanced level specialist. Wisconsin certified emissions state inspector
279429
Type Your Lexus Question Here...
Amedee is online now
A new question is answered every 9 seconds

HOW TO PUT ON A ALTONATOR ON LEXIS RX300 YEAR2000

Customer Question

HOW TO PUT ON A ALTONATOR ON LEXIS RX300 YEAR2000
Submitted: 1 year ago.
Category: Lexus
Expert:  Amedee replied 1 year ago.

Hello and welcome! My name isCustomerand I can assist you with your question. Can I start by getting your VIN? Thank you!

Customer: replied 1 year ago.
i am not where i can seee my vin
Expert:  Amedee replied 1 year ago.

No problem! I should have enough information to send you the R and R procedure.

Expert:  Amedee replied 1 year ago.

REMOVE DRIVE BELT Loosen the pivot bolt, adjusting lock bolt, and adjusting bolt, and remove the drive belt.

REMOVE GENERATOR
Disconnect the generator connector.
Remove the nut, and disconnect the generator wire.
Disconnect the wire harness from the clip.
Remove the pivot bolt, plate washer, adjusting lock bolt and generator.
INSTALLATION
Installation is in the reverse order of removal