Jeep

Have Jeep questions? Ask a Jeep repair expert for answers

Connect one-on-one with {0} who will answer your question

Related Jeep Questions
My oil drain plug on my 2002 jeep Wrangler is stripped it
My oil drain plug on my 2002 jeep Wrangler is stripped it won't tighten or loosen I need to remove it repair or replace the oil pan which I don't want to do .how can I get it off. … read more
Roger
Roger
Automotive Technician
Associate
688 satisfied customers
Man what isn't. I have a waterfall of coolant rushing out of
Man what isn't. I have a waterfall of coolant rushing out of the passenger side exhaust manifold stud hole … read more
Billy
Billy
Trainer
Bachelor's degree
6,096 satisfied customers
I was removing the thermostat and dropped the bottom bolt.
I was removing the thermostat and dropped the bottom bolt. It surprised me that it was so short and I didn't secure it, so it dropped. It didn't hit the ground and I couldn't find it any where I could… read more
camerontech
camerontech
20 year experience diagnostic technician
class a
2,121 satisfied customers
It dies after getting speed up to 20 mph. 2013 patriot. I
Good morning, it dies after getting speed up to 20 mph … read more
Bart
Bart
Master Automotive Technician
High School Diploma
4,527 satisfied customers
Need starter bolts for 2005 Jeep Wrangler. Bolts fell out
Need starter bolts for 2005 Jeep Wrangler JA: Okay, I'll connect you to the mechanic to discuss this further with you. Before I do, is there anything else you want him to know? Customer: Bolts fell ou… read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
25,010 satisfied customers
2000 WJ. The oil drain is stripped but not leaking. Looking
2000 WJ. The oil drain is stripped but not leaking. Looking at replacing the oil pan or trying to remove the drain and tapping out the pan. Then replacing the drain with the next size drain up. … read more
AZTechBrian
AZTechBrian
ASE Certified Technician & Shop Owner
Vocational, Technical or Trade School
732 satisfied customers
Changing thermostat. upper bolt came off. lower bolt broke.
Changing thermostat. upper bolt came off. lower bolt broke. i tried to heat it and vice grip it. nothing. it eventually broke off flush with the housing. I ended up removing the fan and shroud to get … read more
EricFromCT
EricFromCT
6,820 satisfied customers
I have a 1997 jeep grand Cherokee laradeo and went to
hello I have a 1997 jeep grand Cherokee laradeo and went to replace crank position sensor and the old CPS was had no old bolt and apparently bolts don't come with new crank pos sensors I am in a fine … read more
Virtual Wrench
Virtual Wrench
Owner of LJ Auto Repair 37 years
Associate Degree
14,420 satisfied customers
99 Jeep Cherokee: Changing out the original rear shocks.
99 Jeep Cherokee: Changing out the original rear shocks. Snapped the top bolts on the first one, now I'm trying to drill out and re-tap. Drilling is going slow, I'm starting with small bit and working… read more
Clayso
Clayso
Shop Owner Master Technician
ASE Master Certified Automobile Technician
879 satisfied customers
jeep: where is the weep-hole on an ax15 trans? I have an aftermarket
where is the weep-hole on an ax15 trans? I have an aftermarket transfer-case in a 1999 jeep tj with an ax15. the input on the tc does not mate with the rear seal on the back of the trans, so the dry z… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
5,722 satisfied customers
wobble..front right tire mechanic said every is tight and nothing worn
i have a wobble in front right tire mechanic said every is tight and nothing worn. why is the tire feel like it is shaking?… read more
Repair1014U
Repair1014U
Recently Retired
Vocational, Technical or Trade Scho
707 satisfied customers
1994 Jeep Wrangler: what size bolts are used..mount..spare tire
I have a 1994 Jeep Wrangler and need to know what size bolts are used to mount the spare tire carrier?… read more
william readon
william readon
NONE
1,899 satisfied customers
2010 Jeep wrangler: bumper..two bolts..plate..the two tow hooks
I am trying to remove the black plastic bumper guard from a 2010 Jeep wrangler bumper. I have removed the two bolts from the rear of the support plate (and also the two air dams) and the guard is loos… read more
Instructor jp
Instructor jp
technical instructor
Associate Degree
313 satisfied customers
Jeep Grand Cherokee 4x4 laredo replacing right rear oil seal
replacing right rear oil seal need advice and schematics as i haven't done this kinda work for several years. 2004 jeep grand cherokee laredo pkg… read more
Mark
Mark
22 Year Factory trained technician
Vocational, Technical or Trade Scho
3,289 satisfied customers
1992 jeep wrangler: rust spot under my seat bracket..bolt screws in
I just bought a 1992 jeep wrangler. I pulled up all the carpet to find a rust spot under my seat bracket where the bolt screws in. How do i fix this?… read more
ZZDaryl
ZZDaryl
Lead Auto Tech
Some college and advanced training
11,511 satisfied customers
1991 jeep: 4.0 engine..bolt..thermostat housing didnt come..threads
on a 1991 jeep 4.0 engine,the top bolt on the thermostat housing didn't come out correctly.the threads are gaulded .the hole is only about 3/8 inch deep.how deep can i drill to rapair?or what is the r… read more
Expert
Expert
4,444 satisfied customers
2004 Jeep Cherokee Laredo: 6 cylinder, 4.0 engine..throttle boy..heads
I have a 2004 Jeep Cherokee Laredo with a 6 cylinder, 4.0 engine. I need to know what size the 4 bolts that hold the throttle boy to the mainfold are. My son had a brain fart abd broke off the heads o… read more
Mark
Mark
22 Year Factory trained technician
Vocational, Technical or Trade Scho
3,289 satisfied customers
1999 jeep grand cherokee limited: bearing..the bolt..transfer case
I asked a question about my front drive shaft on my 1999 jeep grand cherokee limited. The bearing keep going out on the driver shaft. I was informed it could be I needed to drill an air vent in the bo… read more
Instructor jp
Instructor jp
technical instructor
Associate Degree
313 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

< Previous | Next >

Meet the Experts:

Chris

Chris

Shop Foreman

4,285 satisfied customers

Jeep Certified Master Tech

Mark

Mark

22 Year Factory trained technician

3,289 satisfied customers

Jeep factory training........25 years in the industry.

Dave

Dave

Jeep Master Tech

1,149 satisfied customers

Chrysler Triple Master, ASE master Tech AA degree in Auto.

moparfl

moparfl

ASE Certified Technician

1,130 satisfied customers

ASE Master Tech Chrysler Dodge Jeep Master Tech

Tim Mohr

Tim Mohr

ASE MASTER TECH

1,115 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Chris (aka-Moose)

Chris (aka-Moose)

Technician

972 satisfied customers

24 years of experience diagnosing & repairing

jeepmopar76

jeepmopar76

Jeep/Chrysler Triple Master Tech

581 satisfied customers

32yr ASE Master Tech, 9yr Chrysler Master Tech, 19 yr Jeep Dealership service including AMC/Eagle

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x