Jeep

Connect one-on-one with {0} who will answer your question

Related Jeep Questions
Misfire in cylinder 6 but the jeep runs great only reason we
misfire in cylinder 6 but the jeep runs great only reason we knew is the engine light came on. had the coils and spark plugs replaced per the code but this did not fix the misfire compleley. they comp… read more
Daniel Chaidez
Daniel Chaidez
Technician
Diploma
2,109 satisfied customers
Was plowing snow yesterday, jeep wrangler conked out and
was plowing snow yesterday, jeep wrangler conked out and wont start up. checked the fuel pump, and replaced it. its getting fuel. pulled the plug on number one left the plug out sarted up ran for abou… read more
Dan
Dan
Dealership Technician
Associate Degree
2,512 satisfied customers
It will crank and start but when you give it gas it bogs
It will crank and start but when you give it gas it bogs out. Runs rough. Loud sound of air sucking through the throttle body … read more
Pete
Pete
Automotive Diagnostic Specialist
General auto certifications
33,643 satisfied customers
How are you? Got a 95 Jeep Wrangler YJ, 2.5l with 130k. I
Got a 95 Jeep Wrangler YJ, 2.5l with 130k. I recently restored the entire Jeep, body off restoration. I'm having a hesitation problem that I can't seem to resolve. So far, I've changed the fuel pump, filter, crankshaft position sensor, camshaft position sensor, coil, cap, rotor, plugs, wires, cleaned the throttle body, new TPS, new O2 sensor, new exhaust manifold, used intake manifold, intake sensor and timing chain. Each of these were done independently and I still have the same issue. I've replaced everything I can think of! … read more
Toyota Service
Toyota Service
Toyota Dealership Service & CR Manager
5,455 satisfied customers
2007 JEEP WRANGLER 3.8. #6 MISFIRE WHEN FIRST STARTED THEN
2007 JEEP WRANGLER 3.8. #6 MISFIRE WHEN FIRST STARTED THEN STARTS FIRING FINE. I CAN MONITOR IT ON DATA STREAM. PLUGS WIRES AND COIL HAVE BEEN REPLACED. … read more
David Craig
David Craig
OWNER/MECHANIC
Associates
9,539 satisfied customers
I have a 1995 jeep wrangler with a 4 cylinder. It has 400
I have a 1995 jeep wrangler with a 4 cylinder. It has 400 thousand miles on it. It has fuel injection. I used to just turn the key and it would start. Now I have to play with the gas pedal to get it t… read more
Chris
Chris
Shop Foreman
3,850 satisfied customers
wrangler: 2001 jeep wrangler 4.0 runs out good but some times
2001 jeep wrangler 4.0 runs out good but some times driving come up to a light to stop truck will just shut off but will start right back up???? im thanking fuel psi problum..... need to be shore… read more
Chris
Chris
Shop Foreman
3,850 satisfied customers
2002 Jeep Wrangler: mechanical..air/fuel filter, & spark plugs
2002 Jeep Wrangler w/ 70k miles, in-line six, and drinks gas like crazy. I acquired vehicle w/51k and previous owner abused the heck out of jeep. The only mechanical attention I've given it are: fluid… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
1992 wrangler: running rich..gas mileage..never stalled..misfire
Hello, I have a 1992 wrangler 2.5 that is running rich and getting horrible gas mileage. The idle does fluctuate up to 1100 -1500 rpms at times. It has never stalled or seemed to misfire. I have repla… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
87 jeep comanche: 2wd../ throttle body injection..wont start..crank
My '87 jeep comanche (2wd, 4spd.) has a 2.5 liter engine w/ throttle body injection has a fuel problem. It's running rich, gets terrible mpg, and here's the kicker: after running and sitting for a hal… read more
Chris
Chris
Shop Foreman
3,850 satisfied customers
1997 jeep wrangler sahara: tune..distributor rotor wires..cold start
Have a 1997 jeep wrangler sahara 4.0 6 - had been throwing bunch of misfires codes did the tune up with distributor rotor wires plugs now only throwing p301 code - still a little rough on cold start t… read more
Stonyman
Stonyman
automotive technician
High School or GED
723 satisfied customers
2000 JEEP WRANGLER: efi..GOOD SPARK..tach DOES NOT MOVE WHILE CRANKING
2000 JEEP WRANGLER 2.5 EFI NO START HAS GOOD SPARK SPARK PLUGS ARE DAMP FROM FUEL SPARK PLUGS ARE NEW...... THE TACH DOES NOT MOVE WHILE CRANKING ????… read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
24,610 satisfied customers
1997 jeep wrangler: manual transmission..clutch pedal..Same thing
1997 jeep Wrangler 4.0 manual transmission. For a couple of weeks it seems that the clutch switch as been acting up as I have to 'play' with the clutch pedal to get the engine to turn over. Same thing… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
2001 jeep grand cherokee: what years will it fit this vehicle
well after dealing with a my 2001 jeep grand cherokee 4.7 engine i think the engine must be bad. i was wondering what years will it fit this vehicle… read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
24,610 satisfied customers
jeep: cold start..injectors, plugs and wires, runs great..30 seconds
what would cause my jeep to hesitate only on cold start-up? i cleaned the injectors, plugs and wires, runs great after 30 seconds. 99k miles… read more
Stonyman
Stonyman
automotive technician
High School or GED
723 satisfied customers
1989 jeep wrangler: throttle body..fuel pressure regulator..wont start
1989 jeep wrangler 2.5 throttle body .. i took the fuel pressure regulator out .. the diaphragm has 2 tears in it ..they dont do all the way though ... the plugs are new 3 miles on them ..they are bla… read more
Scott
Scott
Manager/Technician
Associate Degree
1,618 satisfied customers
1989 jeep wrangler: throttle body..fuel pressure..fuel pump..ecu
1989 jeep wrangler 2.5 throttle body im not getting fuel pressure i replaced the fuel pump as well as the ecu a year ago..it will run for about 30 to 40 secs when it soes start… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
1997 wrangler se: timing advance..hesitation..have obd II scanner.
1997 wrangler se 2.5 l. jumpy timing advance at idle. Lack of power, hesitation, black soot clouds when hit the gas. Have OBD II scanner. Replaced, both O2 sensors, tps sensor, distributor hall effect… read more
a-mechanic
a-mechanic
Shop Foreman
Associate Degree
298 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

< Previous | Next >

Meet the Experts:

Chris

Chris

Master Mechanic

55,345 satisfied customers

16 years repairing domestic, foreign and luxury cars

Chris

Chris

Shop Foreman

3,850 satisfied customers

Jeep Certified Master Tech

Mark

Mark

22 Year Factory trained technician

2,760 satisfied customers

Jeep factory training........25 years in the industry.

Dave

Dave

Jeep Master Tech

1,149 satisfied customers

Chrysler Triple Master, ASE master Tech AA degree in Auto.

moparfl

moparfl

ASE Certified Technician

1,130 satisfied customers

ASE Master Tech Chrysler Dodge Jeep Master Tech

Tim Mohr

Tim Mohr

ASE MASTER TECH

1,094 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

jeepmopar76

jeepmopar76

Jeep/Chrysler Triple Master Tech

581 satisfied customers

32yr ASE Master Tech, 9yr Chrysler Master Tech, 19 yr Jeep Dealership service including AMC/Eagle

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less