Jeep

Have Jeep questions? Ask a Jeep repair expert for answers

Connect one-on-one with {0} who will answer your question

Related Jeep Questions
When I start it and it idles it will start idling hard,
When I start it and it idles it will start idling hard, kinda stalls if I dont start going right away and then I have to pump the gas a little bit to get it to go and once it starts going it clears up… read more
Keiphun Sowell
Keiphun Sowell
AutoDiesel Technology
99 satisfied customers
2007 jeep grand Cherokee 4.7 motor, 90,000 miles,last month
Second opinion] 2007 jeep grand Cherokee 4.7 motor, 90,000 miles,last month code p0300 (random misfiring) cylinders 2,4,6,8 misfiring. bank 2. check fuel rail pressure, pressure over normal limits. ch… read more
Greg
Greg
Shop owner, technician
Vocational, Technical or Trade Scho
6,387 satisfied customers
I have a 2002 jeep grand Cherokee with an ho 4.7. Can I
Second opinion] I have a 2002 jeep grand Cherokee with an ho 4.7. Can I install a 4.7 from a 2004 jeep grand Cherokee with the wiring harness The downer is vin J4GW48NO4C421901 mine is a *************… read more
Tyler Henry
Tyler Henry
Technician
Automotive service technology
2,981 satisfied customers
Engine light has been on for years, but it mostly runs fine.
Engine light has been on for years, but it mostly runs fine. Occasionally after idling for a few minutes, it starts to run rough. Then it will smooth out when I rev it up or start drivingl … read more
Roy
Roy
shop foreman
Associate Degree
5,208 satisfied customers
Correct O2 sensor grand cherokee upstream cat bank
correct O2 sensor for 2005 grand cherokee upstream cat bank 2/1 and part number please … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,731 satisfied customers
Jeep Grand Cherokee SE: I am working on a 2004 jeep grand Cherokee.
I am working on a 2004 jeep grand Cherokee. It has a 4.7 power tech engine. When it starts in the morning most although it will do it other times. It revs way up then idles down. But when t comes down… read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
24,495 satisfied customers
2002 Jeep Grand Cherokee limited: idling..keep my foot..gas pedal
2002 Jeep Grand Cherokee Limited 4.7 L I checked the OBD-Codes because my Jeep is having problems idling the past few days I have to keep my foot on the gas pedal to keep it running. The OBD Diag gave… read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,412 satisfied customers
2004 jeep grand cherokee: 4.0L replaced o2 sensors..wiring harness
2004 jeep grand cherokee 4.0L replaced o2 sensors with ngk brand all 4 sensors bank1 sensor1, bank1 sensor2, bank2 sensor1 still tripping codes. Check wiring harness it looks fine insulation was rubbe… read more
Kennyb28
Kennyb28
Service Manager
High School Diploma, some college,
327 satisfied customers
2002 jeep grand cherokee 4.7 V8. Intermittent non start now no go.
2002 jeep grand cherokee 4.7 V8. Intermittent non start now no go. Fault codes P0320 ( crank sensor ) Changed this. P0051 heater on O2 sensor I think. P1299 and P1389 are manufactures specific codes ?… read more
Tom
Tom
Professor, Auto Technology
Bachelor's Degree
862 satisfied customers
2002 GRAND CHEROKEE: CHECK ENGINE LIGHT..o2 SENSOR..rpms..SMOOTH
I HAVE A 2002 GRAND CHEROKEE 4.7 ENGINE THAT WILL NOT PASS STATE INSPECTION.THE ENGINE WILL RUN FINE, BUT SOMETIMES AT IDLE IT WILL RUN ROUGH AND THE CHECK ENGINE LIGHT WILL COME ON.I HAVE HAD THE COD… read more
garrtim
garrtim
SERVICE MANAGER
2,271 satisfied customers
2000 Grand Cherokee: 100,000 miles..stopping..idled..back down
I have a 2000 Grand Cherokee, recently purchased from private owner... Jeep has 100,000 miles, but overall in good to exceelent shape.. Today I noticed when stopping at the house and vehicle in park, … read more
jazzmaster
jazzmaster
LEAD AUTO TECH
Vocational, Technical or Trade Scho
2,873 satisfied customers
I have a Jeep Grand Cherokee 2004 4.7L It idles fine, but has
I have a Jeep Grand Cherokee 2004 4.7L It idles fine, but has a hesitation that lasts for about thirty seconds every one minute that makes the engine to vibrate abnormally. After running for some time… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
2002 Jeep Grand cherokee: idle control motor..o2 sensor..engine revs
I have a 2002 Jeep Grand Cherokee.4.7 motor. Replaced the idle control motor and o2 sensor. When started in the AM engine revs, then comes down. Then the idle goes up and down a few hundred rpm's .If … read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
2001 Jeep Grand Cherokee 4.7 127k miles with all original sensors.
2001 Jeep Grand Cherokee 4.7 127k miles with all original sensors. Trans erratic shifting. Seems to flutter back and forth from 5th to 4th at around 50 - 60 mph. Seems to occur with slight load - not … read more
sprinkles08
sprinkles08
Technician
High School or GED
18,920 satisfied customers
99 jeep grand cherokee: check engine light..oil pressure gauge..idling
I've got a 99 jeep grand cherokee lorado. check engine light is on and oil pressure gauge is pinned at 80. idling at 1200 rpm. a little rough, more like a slight tremor.… read more
Instructor jp
Instructor jp
technical instructor
Associate Degree
313 satisfied customers
2001 Jeep Grand Cherokee: V8..intermittently..Cold start, engine runs
2001 Jeep Grand Cherokee 4.7 V8: Idle speed is intermittently high after engine reaches operating temperature. Cold start, engine runs to 2000 RPM for about 2 to 3 seconds then drops to 1500 then drop… read more
Derrick
Derrick
Associate Degree
920 satisfied customers
2004 Jeep Cherokee: liter engine..a check engine light the OBD II code
I have 2004 Jeep Cherokee Freedom additionwith a 4.0 liter engine. I have a check engine light the OBD II code is P0051 heater sensor circuit low bank2 sensor 1. I have replaced the Oxygen sensor bank… read more
Donny
Donny
Associate Degree
828 satisfied customers
2002 Jeep Grand Cherokee Limited: EVAP..Control System..DIY possible
Have a 2002 Jeep Grand Cherokee Limited. Has a error code of PO446 - EVAP Emmision Control System Ventilation Circuit Malfunction. What is my course of action for repair.... DIY possible or no?… read more
Matt
Matt
Technican
Vocational, Technical or Trade Scho
108 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

< Previous | Next >

Meet the Experts:

Chris

Chris

Shop Foreman

3,850 satisfied customers

Jeep Certified Master Tech

Mark

Mark

22 Year Factory trained technician

2,760 satisfied customers

Jeep factory training........25 years in the industry.

Dave

Dave

Jeep Master Tech

1,149 satisfied customers

Chrysler Triple Master, ASE master Tech AA degree in Auto.

moparfl

moparfl

ASE Certified Technician

1,130 satisfied customers

ASE Master Tech Chrysler Dodge Jeep Master Tech

Tim Mohr

Tim Mohr

ASE MASTER TECH

1,094 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Chris (aka-Moose)

Chris (aka-Moose)

Technician

60,493 satisfied customers

16 years of experience

jeepmopar76

jeepmopar76

Jeep/Chrysler Triple Master Tech

581 satisfied customers

32yr ASE Master Tech, 9yr Chrysler Master Tech, 19 yr Jeep Dealership service including AMC/Eagle

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x