Jeep

Have Jeep questions? Ask a Jeep repair expert for answers

Connect one-on-one with {0} who will answer your question

Related Jeep Questions
I have a 2006 Jeep Wrangler LJ (TJ) w/ 4.0l 6. Got a code
I have a 2006 Jeep Wrangler LJ (TJ) w/ 4.0l 6. Got a code P0016 for camp/crank position sensor. I replaced that, but in doing so noticed OPDA was loose (explains my oil leak!). I had this replaced at … read more
Ron
Ron
Automotive Tech
Vocational, Technical or Trade Scho
39,684 satisfied customers
Replaced to the distributor and now @ about 3000 rpm runs
replaced to the distributor and now @ about 3000 rpm runs rough with no power. my question is where should the rotor point with #1 @ tdc compression stroke … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,905 satisfied customers
Put new camshaft in and haveing problem getting it in time.
Put new camshaft in and haveing problem getting it in time … read more
Mark
Mark
22 Year Factory trained technician
Vocational, Technical or Trade Scho
2,760 satisfied customers
Distributor from Autozone mounting problem. Just bought a 95
Distributor from Autozone mounting problem. Just bought a 95 Jeep Cherokee Country L6' 4.0. Have a Haynes manual for it. I tried exactly as book describes, I'm at tdc on cylinder 1( verified this a co… read more
Chris
Chris
Shop Foreman
16,491 satisfied customers
I have a 1992 Jeep Wrangler, 4.0 l H.O. motor... The
I have a 1992 Jeep Wrangler, 4.0 l H.O. motor... The flywheel was removed without marking it's possition how do I set the flywheel to the correct crank timing to match tdc on my ignition timing. … read more
Ron
Ron
Automotive Tech
Vocational, Technical or Trade Scho
39,684 satisfied customers
Wrangler: I have a 1997 jeep wrangler TJ 4.0 Just finished
I have a 1997 jeep wrangler TJ 4.0 Just finished replacing the distrubitor and re doing the timing, now when i go to turn it over it just cracks and sputters, when i had a friend turn the key so i cou… read more
Mark
Mark
22 Year Factory trained technician
Vocational, Technical or Trade Scho
2,760 satisfied customers
Jeep grand cherokee: put another..it turns over but dont fire up
i have a jeep grand cherokee and i just put another motor and now it dont start i have a computer for it and i have the code it gave me but it dont start it turns over but dont fire up could it be out… read more
Tom
Tom
Professor, Auto Technology
Bachelor's Degree
862 satisfied customers
I get a 4.0 distributor back in time?..put on a new gasket
How do I get a 4.0 distributor back in time? I removed it to put on a new gasket and can't get it back in time.… read more
garrtim
garrtim
SERVICE MANAGER
2,271 satisfied customers
Just broke both Distributor cap screws attempting to change
Just broke both Distributor cap screws attempting to change cap and rotor. Now I need to replace distributor. How do I remove old distributor. Vehicle is 1998 Jeep Wrangler 4.0L 6 Cyl… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
1999 Jeep: cyl..Timing chain..Camshaft..point that heade gasket blew
On An 1999 Jeep Wranlger 2.5l 4 Cyl Engine Where Is 12 Oclock While Timing chain . A Accross The Center Of The Camshaft Sprocket And The Crank Shaft Sprock Or B Dead Center Looking Down At The Engine … read more
Pavlin Koev
Pavlin Koev
Diagnostic Technician
High School or GED
3,485 satisfied customers
Jeep wrangler: 6 cyl 4.0 it has 32,000 mi..cam shaft..lifters
i have a 04 jeep wrengler 6 cyl 4.0 it has 32,000 mi. i just had to replace the cam shaft the hyd lifters and the pushrods. 2 questions i dont know what position the camshaft position sensor goes back… read more
Doug in North Carolina
Doug in North Carolina
Automotive Service Technician
Vocational, Technical or Trade Scho
301 satisfied customers
2000 jeep grand cherokee: inline..engine block..machined..distributor
how do you install and time a distributor drive on a 2000 jeep grand cherokee with a 4.0 liter inline six cylinder after it has been removed so the engine block could be machined. i'm not farmilar wit… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
1,130 satisfied customers
A 2.5L and need to know how to set the distributar ton top dead center
i have a 2.5L and need to know how to set the distributar ton top dead center so the motor will start. how do know if i am 180 out or just a tooth off… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
13,392 satisfied customers
4.0...Brought to me with no distributor or timing set installed
timing question for 4.0. Brought to me with no distributor or timing set installed. what is the best way to setup. haynes book isnt even close.… read more
Richard
Richard
Shop foreman/Lead technician
Vocational, Technical or Trade Scho
4,140 satisfied customers
97 jeep wrangler 2.5 sputters like out of fuel or air when
97 jeep wrangler 2.5 sputters like out of fuel or air when taking off. Once up to speed mostly fine, but an occasional sputter. seems to idel fine. every once in a while, when you hit the key it grunt… read more
Richard
Richard
Shop foreman/Lead technician
Vocational, Technical or Trade Scho
4,140 satisfied customers
99 jeep grand cherokee: 4wd..cam sensor..removing..the shaft how can i
i have a 99 jeep grand cherokee 4wd 4.0 liter i didnt set cam sensor before removing i removed the whole sensor and the whole thing with the shaft how can i get it back in time. i tryed to put it back… read more
cda1277
cda1277
High School or GED
84 satisfied customers
Jeep wrangler: Just put in a new distributor..jump..I set the timing.
Just put in a new distributor and tried to jump the battery to start. How do I set the timing. Jeep wrangler 1997.… read more
Donny
Donny
Associate Degree
828 satisfied customers
92 jeep cherokee laredo: trouble with the initial distributer timming
i have a 92 jeep cherokee laredo with a 4.0 and i am having trouble with the initial distributer timming. the book that i have does not give a complete discription of to drop it in. do you have a deta… read more
a-mechanic
a-mechanic
Shop Foreman
Associate Degree
298 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

< Previous | Next >

Meet the Experts:

Chris

Chris

Shop Foreman

16,491 satisfied customers

Jeep Certified Master Tech

Mark

Mark

22 Year Factory trained technician

2,760 satisfied customers

Jeep factory training........25 years in the industry.

Dave

Dave

Jeep Master Tech

1,149 satisfied customers

Chrysler Triple Master, ASE master Tech AA degree in Auto.

moparfl

moparfl

ASE Certified Technician

1,130 satisfied customers

ASE Master Tech Chrysler Dodge Jeep Master Tech

Tim Mohr

Tim Mohr

ASE MASTER TECH

1,094 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Chris (aka-Moose)

Chris (aka-Moose)

Technician

699 satisfied customers

16 years of experience

jeepmopar76

jeepmopar76

Jeep/Chrysler Triple Master Tech

581 satisfied customers

32yr ASE Master Tech, 9yr Chrysler Master Tech, 19 yr Jeep Dealership service including AMC/Eagle

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x