How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Jeep
Satisfied Customers: 22690
Experience:  Chrysler/Dodge/Jeep Master Certified, ASE Master and Advanced Certified, Trans and Hybrid Specialist
Type Your Jeep Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

I have a 2006 jeep grand Cherokee with the mercedees nag1

Customer Question

I have a 2006 jeep grand Cherokee with the mercedees nag1 transmission and I changed the conductor plate and now it doesn't start. I know I did everything right I have the repair manual for the transmission and watched several you tube videos. When I turn the key it just clicks it's not the battery and I replaced the starter a year ago before I changed the plate it started fine . I have checked the starter relay it's ok.
JA: Have you changed a battery before?
Customer: yes
JA: Are you fixing your Grand Cherokee yourself? What have you tried so far?
Customer: I tried a new relay the starter is only a year old
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 6 months ago.
Category: Jeep
Expert:  sprinkles08 replied 6 months ago.

Hello and welcome to JustAnswer!

There may be several things causing your problem. It could be related to replacing the lead plate or it may not, electrical testing may be required to determine what is going on. If you do hear a single click from the engine compartment then you may just have a poor connection at the starter solenoid terminal.

Do you have a scan tool to monitor shifter position in the TCM?

Related Jeep Questions