Have Jeep Questions? Ask a Jeep Repair Expert for Answers
Hi, my name is ***** ***** I will assist you
I'm looking in to it for you
1. The Tan wire should have power when the key is in the "on" position or the "Acc" position. This comes directly from the ignition switch. The ignition switch is fed power from the Dark Blue wire, which is powered through fuse 13 40-amp fuse in the Power Distribution Center (PDC).
*this is in reference to the master window switch. You can check that fuse first, and if it is ok, you probably have an issue with the wiring to the master switch. The wire commonly breaks in the door jamb where the wires come in from the inside of the car. Good luck!
Have you checked the fuse number 13 in the under-hood fuse box?
They do not have any labeled for windows on this vehicle, but by the diagram that fuse supplies power to the switch