How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris, Shop Foreman
Category: Jeep
Satisfied Customers: 3367
Experience:  Jeep Certified Master Tech
Type Your Jeep Question Here...
Chris is online now
A new question is answered every 9 seconds

Gauges don't work the lights work but all gauges are dead I

Customer Question

gauges don't work the lights work but all gauges are dead I took the cluster out checked and cleaned the connection and put the special grease on the connection it is a 1999 wrangler tj
JA: Just to clarify, what are the exact lights you're talking about?
Customer: dash light
JA: What is the make/model of your car?
Customer: 99 wrangler tj 4 cyl standard
JA: Are you fixing your Wrangler yourself? What have you tried so far?
Customer: cleaned the connection and checked the ground
JA: Anything else you want the mechanic to know before I connect you?
Customer: not sure
Submitted: 9 months ago.
Category: Jeep
Expert:  Amedee replied 9 months ago.

Hello and welcome!

My name isCustomerand I can assist you with your question.

Expert:  Amedee replied 9 months ago.

Does the engine start and run?

Habe you checked for codes in the computer?

Are you looking for possible causes?

Customer: replied 9 months ago.

The engine starts and runs, but none of the gauges work I have read about checking the fuses Iwould like to know which fuse to look at All of them seem fine but I dont have the top cover on my power distribution center to know which one might have an issue.

Expert:  Amedee replied 9 months ago.

Hello and good morning!

I can definately provide you with this information.

May I please start by getting your VIN?

Thank you!