Have Jeep Questions? Ask a Jeep Repair Expert for Answers
Hello, my name is ***** ***** I am a professional here at Justanswer. Thank you for your question and I will assist you with your concern.The code indicates the fuel volume message is corrupt or doesn't make sense to the Powertrain Control Module (PCM). Check all modules for any other Diagnostic Trouble Codes (DTCs). A Controller Area Network (CAN) bus B failure could set this code. If there are no other codes coming up then try doing a system reset, to do this disconnect both battery cables and rub them together of a few seconds and then reconnect them and recheck the system to see if the code resets. If so them further testing will need to be done. Let me know the results and we can work from there if need be.
Try the reset and let see if that solves this, let me know and we can work from there if need be.
Okay so is the same code setting after the reset?
Okay then the next steps is going to require some testing. Are you able to do this if I send you the steps?
Okay I have posted the test steps for this code . Have a look and post back if you have more questions and or need more help.https://dl.dropboxusercontent.com/u/104923897/U1411%20Aug%2022.pdf