Have Jeep Questions? Ask a Jeep Repair Expert for Answers
•Service and Repair
1.Locate the transmission control module on the dash panel, under the dash panel silencer pad (2), just to the right of the steering column. 2.Locate the cut lines (1) marked on the silencer pad. Cut the pad along these lines.
3.Remove the transmission control module from the dash panel or bracket. 4.Disconnect the wiring harness connectors (3) from the module. 5.Remove the module from the vehicle.
1.Connect the wiring connectors (3) to the transmission control module (1). 2.Install the module to the dash panel (2) or the mounting bracket. 3.Fold the dash panel silencer pad back over
Please remember to only rate my service when you are satisfied. IF you feel the need to rate "Poor Service" or "Bad Service", please stop and reply to me via the REPLY TO EXPERT button with the issue you have. I will be happy to continue further and do everything I can to provide you with the service you seek.I am not paid unless I get a rating of 3 to 5 Stars/Smiley Faces. As always I'm happy to provide my time/service & resources so If I have helped you with your question, please give me an appropriate rating so that I get credit for helping you. Thank you and good luck with your vehicle!