How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Jeep
Satisfied Customers: 23004
Experience:  Chrysler/Dodge/Jeep Master Certified, ASE Master and Advanced Certified, Trans and Hybrid Specialist
Type Your Jeep Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Mileage, outside temperature, cruise control lights, low

Customer Question

Mileage, outside temperature, cruise control lights , low fuel light, tow hail light, seat belt lights don't light up
JA: Have you checked the fuse? What size is your engine?
Customer: We. R checking fuses, but not sure which one to check
JA: What is the model/year of your Jeep?
Customer: 2009 Jeep Liberty
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: Yes, checking fuses
JA: Anything else you think the mechanic should know?
Customer: Everything works, but lights on dash don't show up
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Jeep Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Jeep
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

It sounds as if you have an internal failure in the instrument cluster or possibly a poor power or ground to the cluster.

Do these bulbs not light for a bulb check when the key is turned on?

Did the problem start after a repair, jump start, etc?

Customer: replied 1 year ago.
No, they don't light. No problems with the vehicle before this happened
Expert:  sprinkles08 replied 1 year ago.

What will need to be done is remove the instrument cluster and load test it's power and ground feeds. If ok then the cluster can be condemned.