How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Jeep
Satisfied Customers: 22693
Experience:  Chrysler/Dodge/Jeep Master Certified, ASE Master and Advanced Certified, Trans and Hybrid Specialist
9825021
Type Your Jeep Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

My wife was in a slight front end collision so i decided to

Customer Question

My wife was in a slight front end collision so i decided to do the body work my sea
JA: What is the model/year of your Jeep?
Customer: 2004 liberty
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: Well my turn signals and hazards are not working
JA: Have you checked the fuse? Have you checked for bad bulbs?
Customer: Yes checked fuzes and bulbs
JA: Anything else you think the mechanic should know?
Customer: I changed the flasher relay and multifunctional switch and still nothing
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Jeep Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Jeep
Customer: replied 1 year ago.
Also seen online on a couple of different site it could be the trailer hitch wiring but i dont have wiring for a trailer hitch i also changed out the hazard switch its self
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

If you've lost all turn signals and the hazards at the same time yet fuses are good then the most likely cause would be the flasher.

Since the problem appears to have happened due to an accident though a blown fuse is very likely since wiring may have shorted to ground. The fuses in question are in the junction block, in the left end of the dash. You've checked fuses 11 and 39 there?

Customer: replied 1 year ago.
I have and both appear to be good
Expert:  sprinkles08 replied 1 year ago.

Does the flasher click when the turn signals or hazard are turned on?

Customer: replied 1 year ago.
No it doesnt do anything
Expert:  sprinkles08 replied 1 year ago.

Are you positive that hazards and turn signals were lost at exactly the same time?

Was any wiring damaged?
Where did the replacement flasher come from?

Customer: replied 1 year ago.
One of the turn signal wires were severed completely i wired and electrical taped them back together, it was the leftside turn signal wires
Customer: replied 1 year ago.
Replacement flasher relay was bought at O'Reilly's auto parts
Expert:  sprinkles08 replied 1 year ago.

Do you have a test light?

Customer: replied 1 year ago.
A friend of mine does , what shall i do with it ?
Expert:  sprinkles08 replied 1 year ago.

The first thing that needs to be done is test for power on the pink/orange and dark blue/white wires at the flasher with the key on.