How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris
Chris, Shop Foreman
Category: Jeep
Satisfied Customers: 3340
Experience:  Jeep Certified Master Tech
12365498
Type Your Jeep Question Here...
Chris is online now
A new question is answered every 9 seconds

I changed the CV's ball joints, struts and new breaks Disk,

Customer Question

i changed the CV's ball joints, struts and new breaks Disk, Pad & caliper. everything it back to gather and now my jeep jurks when I turn it and the front end does not want to spin freely. the tires become hot but the hubs are cool whats going on
Submitted: 1 year ago.
Category: Jeep
Expert:  eauto replied 1 year ago.

are the frt brakes dragging?

Customer: replied 1 year ago.
No , when jacked up the wheels spin free
Expert:  eauto replied 1 year ago.

is it in 4wd?

Customer: replied 1 year ago.
no it is happing in 2wd I did cycle through 4wd h&l also
Expert:  eauto replied 1 year ago.

are the brakes getting hot?

Customer: replied 1 year ago.
no, I bleed them after also to make sure, the tires are getting hot though and when I hit a bump they chirp like they are not moving
Expert:  eauto replied 1 year ago.

?are the ball joints pivoting?

Customer: replied 1 year ago.
I have checked everything for tightness and function that's why I am stumped
Expert:  eauto replied 1 year ago.

ill opt out m stumped also

Customer: replied 1 year ago.
ok, will I be refunded?
Expert:  eauto replied 1 year ago.

well if you would like or I can see if another expert wants to give it a shot? your call

Customer: replied 1 year ago.
Refund please
Expert:  eauto replied 1 year ago.

customer service is notified best of luck

Customer: replied 1 year ago.
Thanks