How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris, Shop Foreman
Category: Jeep
Satisfied Customers: 3369
Experience:  Jeep Certified Master Tech
Type Your Jeep Question Here...
Chris is online now
A new question is answered every 9 seconds

My MIL light is on/off on a 2006 Hemi 5.7 Grand Cherokee ? :

Customer Question

My MIL light is on/off on a 2006 Hemi 5.7 Grand Cherokee ?
JA: Do you have the trouble code? Do you have a code reader or scan tool?
Customer: No
JA: Not a problem. You can work with the Jeep Mechanic to figure that out. Tell me a bit more about what's going on so he can help you best.
Customer: The light is coming on and off. What is the purpose of MIL anyway?
JA: Are you hoping to fix this yourself?
Customer: Most likely not but if the solution is simple without getting into the electric or the engine itself, I can try. Otherwise will leave to the mechanic to fix it. is there any danger of ruining the block?
JA: Is there anything else important you think the Jeep Mechanic should know about your Jeep?
Customer: Ya. The car is 10 yrs old with 140,000 miles. Otherwise is running okay. One more this, around 35 mph when it switch to 4th gear, the engine sometimes stutter
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Jeep Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Jeep
Expert:  Dan replied 1 year ago.

Hello, my name is***** the light flashing while driving? Thanks.

Customer: replied 1 year ago.
They are on and off
Expert:  Dan replied 1 year ago.

Lets start by checking codes, here are instructions to check them. Let me know what they are, thanks.