How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Jeep
Satisfied Customers: 23130
Experience:  Chrysler/Dodge/Jeep Master Certified, ASE Master and Advanced Certified, Trans and Hybrid Specialist
Type Your Jeep Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

2006 jeep liberty CRD cranks but no start

Customer Question

2006 jeep liberty CRD cranks but no start
Submitted: 1 year ago.
Category: Jeep
Customer: replied 1 year ago.
got a P2295 P0091 p0047 from scanner
Customer: replied 1 year ago.
drove in garage ok was looking for lighting issue then would not start, fuel filter seams ok new
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

You have a code for the fuel pressure solenoid and the fuel quantity solenoid. The quantity solenoid sticking open will cause a no start.

Was anything unplugged with the key on?

Do you have any aftermarket equipment which plugs into anything on the engine?