How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall C Your Own Question
Randall C
Randall C, ASE Master Tech
Category: Jeep
Satisfied Customers: 12824
Experience:  ASE Master Tech, L1, Jeep owner, Shop owner
13677702
Type Your Jeep Question Here...
Randall C is online now
A new question is answered every 9 seconds

I have a 96 cherokee with the /orange, /tan, black/blue and

Customer Question

I have a 96 cherokee with the green/orange, white/tan, black/blue and black/white wires and an o2 sensor with a black, a grey and two white wires. I'm not sure which colors are supposed to go together.
Submitted: 1 year ago.
Category: Jeep
Expert:  Randall C replied 1 year ago.

Hello, what you have is a heated o2 sensor so,, 2 wires are for the heater, 1 is the o2 signal and 1 is the sensor ground, so.. the 2 whites are the heater wires, black is the signal wire grey is the sensor ground you hookup chart is below

Green / orange goes to either white

Black/white goes to the other white wire

Tan /white goes to the Black wire

Black/Blue goes to the Grey wire