How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brad Your Own Question
Brad, Jeep Dealership Tech
Category: Jeep
Satisfied Customers: 7946
Experience:  19 Yrs Chrysler/Dodge/Jeep. ASE Master (L-1) Certified
Type Your Jeep Question Here...
Brad is online now
A new question is answered every 9 seconds

I replaced the battery in my 2007 jeep compass,when finished

Customer Question

I replaced the battery in my 2007 jeep compass,when finished the check engine light came on how can I reset light
Submitted: 1 year ago.
Category: Jeep
Expert:  Brad replied 1 year ago.

Good afternoon and welcome to JustAnswer!!

Have you tried disconnecting the battery for 5 min to see if a hard reset helps? If it doesn't then you will need a scantool to see what codes you have and if they are active codes then the check engine light will stay on until they are repaired... But once you have the scantool you can erase them and see if the codes come back..

I hope this helps,


Expert:  Brad replied 1 year ago.

Do you still need help with this?

If not I would appreciate a positive rating so I'm compensated for my time..

Have a good evening,