Have Jeep Questions? Ask a Jeep Repair Expert for Answers
Can you get me the following readings "
First at idle, then again at 2500rpm .
St trim .
Fuel pressure .
Then the engine compression reading on a warm engine .
Was the throttle body and IAC cleaned out .
Okay no tools to check the live data reading on a scan tool .
Okay have the throttle body and IAC cleaned out and then retest .
Have if you can an exhaust back pressure test to see if you have a possible blocked catalytic converter
And do a fuel pressure test .
Okay good after the last repairs did you clear all codes ,you probably did ..
Recheck now for any codes ,even if the check engine light is ON or OFF.
Did you clean the throttle body , this is one of the3 biggest issue for a stalling engine that will start right back up after a stall.
Still stalling and no malfunction codes .
does your scan tool have live data
Can you get the readings of the st fuel trim at idle and again at 2000 rpm .
Yes get me the reading at idle and 200 rpm .