How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brad Your Own Question
Brad
Brad, Jeep Dealership Tech
Category: Jeep
Satisfied Customers: 7828
Experience:  19 Yrs Chrysler/Dodge/Jeep. ASE Master (L-1) Certified
10114124
Type Your Jeep Question Here...
Brad is online now
A new question is answered every 9 seconds

Lost key and fob cherokee --got a 2nd hand ignition module

Customer Question

lost key and fob for 98 cherokee --got a 2nd hand ignition module with key and a 2nd hand key fob -it only starts when i disconnect then reconnect neg batt terminal and dies after 2 seconds can the fob be reprogrammed to my jeep
Submitted: 1 year ago.
Category: Jeep
Expert:  Brad replied 1 year ago.

Good afternoon and welcome to JustAnswer!!!

If your referring to the SKIM module which has the ring that goes around the key cylinder then no it can't be reprogrammed as it's married to the PCM.. You will need to get a new SKIM module to program it to your vehicle with a DRBIII before your vehicle will start and run..

I hope this helps,

Brad