How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jon Your Own Question
Jon, ASE Certified Technician
Category: Jeep
Satisfied Customers: 310
Experience:  Master Chrysler/Jeep/Dodge Tech
Type Your Jeep Question Here...
Jon is online now
A new question is answered every 9 seconds

I have a 00 jeep grand cherokee. I just recently replaces

Customer Question

I have a 00 jeep grand cherokee. I just recently replaces the engine. I checked and double checked everything was hooked properly. My problem is that when go start it no gauges work and the anti theft icon is eliminated but not flashing. When the dealer tryed to connect to computer it couldn't establish a connection. I was told I could be a broken wire but looked over and couldn't locate any. Could be that the computer needs flashing or reset?
Submitted: 1 year ago.
Category: Jeep
Expert:  Jon replied 1 year ago.

Hi, was it the PCM the dealer couldn't communicate with?

Expert:  Jon replied 1 year ago.

If it was, I can give you the pins to check at the PCM to see if it is bad or not.