Have Jeep Questions? Ask a Jeep Repair Expert for Answers
Can I get the last 8 of the VIN?
I need you to check every pin in the PCM connector 1 for loose or corroded.
Review all the ASD terminals at the PCM C1 connector. Inspect for loose, corroded or pushed out terminals. Tighten or clean K51 circuit, BR/WT wire, pin 58(A58) ; secure as needed Review battery voltage PK/GY, F202 Ignition/Run/Start pin 15 (A15), and grounds BK/YL pin 2(A2), pin4(A4).