How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt Your Own Question
Matt
Matt, Engineer
Category: Jeep
Satisfied Customers: 21599
Experience:  Honors degree in Mechanical Engineering, worked 8 years as a Formula 1 engine engineer.
12772297
Type Your Jeep Question Here...
Matt is online now
A new question is answered every 9 seconds

Power drain on battery ,after 3 to 4 day. have to jumper to

Customer Question

power drain on battery ,after 3 to 4 day. have to jumper to start . (new, battery and alternator
Submitted: 1 year ago via CarComplaints.com.
Category: Jeep
Expert:  Matt replied 1 year ago.

Hello

I'd first check the easy things like is the boot light or any other interior light staying on then check that the main battery connections are tight and in good condition also check the earth strap to the engine / gearbox.

Next I'd check the current drain aspect, the best way to find what circuit is causing the excessive currant drain is to fit a current sensing multimeter in series with the positive battery lead on the car and the battery, or use a current clamp meter on the battery positive cable.

A typical current drain with everything off and un-alarmed should be around 0.05Amp and if its higher than this remove a fuse and re-measure, if measurement doesn't change then replace the fuse and remove the next.

Once you've isolated the circuit with the excessive drain check the wiring connections and plugs to components and the wiring harness that runs by the engine bay fuse box - the wiring harness chaffs / rubs through and gets damaged - but its not always easy to see so be careful when checking..

Also check that the alternator is actually charging the battery in the car by taking a battery voltage reading with the engine off then another with the engine running. The 2nd reading should be higher than the 1st and climbing steadily. And also check that the alternator is secure to the engine as this provides the ground for the charging circuit and make sure that the engine / gearbox earth strap is secure and the contacts are clean and bright.

Expert:  Matt replied 1 year ago.
Hi
do you still need help?