How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris, Shop Foreman
Category: Jeep
Satisfied Customers: 3379
Experience:  Jeep Certified Master Tech
Type Your Jeep Question Here...
Chris is online now
A new question is answered every 9 seconds

4 switches 1 warning light 4 relays Need to wire so if any

Customer Question

4 switches 1 warning light 4 relays Need to wire so if any of the switches are turned on the 1 warning is triggered Need it to be set in such a way so that there is no back feed over riding the switch Setting all relays on same ground then put light between
ground and relay.. almost worked flip switch and warning light comes on.. but not enough ground through light to trigger relay
Submitted: 2 years ago.
Category: Jeep
Expert:  George H. replied 2 years ago.
Hello I will help you with your question, Can the switch illuminate the lamp directly to show one is on? The light does not need to be a direct indication of current flow through the relay? Do you already have the switches or are you in the design phase now?