How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris, Shop Foreman
Category: Jeep
Satisfied Customers: 3379
Experience:  Jeep Certified Master Tech
Type Your Jeep Question Here...
Chris is online now
A new question is answered every 9 seconds

The answer didn't help the problem.

Customer Question

the answer didn't help the problem.
Submitted: 2 years ago.
Category: Jeep
Expert:  Eric replied 2 years ago.
I am opting out
Expert:  vipertech replied 2 years ago.
Hello, I have seen this issue before and talked to other mechanics that had this happen to them. The most likely cause is that you cracked the intake. It usually happens near the back corner around cylinder #6. The only other cause would be the intake not being flush against the head. The crack mentioned can be hard to see. You may need to remove the intake to take a closer look at cylinders #1 and #6. Check it out and let me know what you find.