How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Jeep
Satisfied Customers: 22805
Experience:  Chrysler/Dodge/Jeep Master Certified, ASE Master and Advanced Certified, Trans and Hybrid Specialist
9825021
Type Your Jeep Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

2007 Jeep Compass 2.4 litre dead miss no. 1 cylinder PO

Customer Question

2007 Jeep Compass 2.4 litre dead miss no. 1 cylinder PO code 301 and p2302 p2305 I changed spark plugs
Submitted: 2 years ago.
Category: Jeep
Expert:  sprinkles08 replied 2 years ago.
Hello and welcome to JustAnswer!

The P2302 and 2305 are for the number 1 and 2 ignition coil circuits. You most likely have no spark on cylinders 1 and 2. These codes can be caused by failed coils, loss of voltage to the coils due to a wiring issue, or loss of coil driver. Loss of driver could be a failed driver within the powertrain control module, a short to power, ground or an open circuit on the driver wire. It will take some testing of these circuits at the number 1 and 2 coils to determine what you have going on.
Customer: replied 2 years ago.
It's only missing on no. 1 what are you calling a driver is this crank sensor and cam sensor?
Expert:  sprinkles08 replied 2 years ago.
At some point you had lost spark on number 2 also but that may not be current.

The driver is what actuates the coil to produce spark. The coil receives ASD voltage on one wire and the driver circuit is pulsed ground by the PCM.