How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Mechanic
Category: Jeep
Satisfied Customers: 20956
Experience:  Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
Type Your Jeep Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

Grand Cherokee: I have a 2002 JGC. Is there ANY way to program

Customer Question

I have a 2002 JGC. Is there ANY way to program the remote myself? Jeep dealer wouldn't do it cause I bought the remote online.
Submitted: 2 years ago.
Category: Jeep
Expert:  Don 'Mo Lurch' replied 2 years ago.
sorry for the delay............
Greetings...... “Hi, I’m Don (akaCustomer and I look forward to helping you!”
Sorry... there is NO Customer Input for this, unless you have Dealer DRB III Scan Tool.
To program the Remote Keyless Entry (RKE) transmitter access codes into the RKE receiver in the Passenger Door Module (PDM) requires the use of a Dealer DRB III scan tool.
You need to seek another Jeep / Chrysler Dealer or Shop with DRB III Scan Tool & DO NOT mention you purchased Remote.
Simply say it does NOT work.
IF you need more information, please ask "prior" to Rating.
Please take a moment to rate my service so that I can get credit for my time.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
Rating is very Important to our Service