How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chad Your Own Question
Chad, Lead Master Tech
Category: Jeep
Satisfied Customers: 1114
Experience:  Electrical master,Diesel Specialist,Lead Tech/shop foreman
Type Your Jeep Question Here...
Chad is online now
A new question is answered every 9 seconds

2011 Jeep grand cherokee: the amp rating..trailer..fuse box..diagram

Resolved Question:

What is the amp rating of the fuse that contols the seven pin trailer connection and where can I get a 2011 Jeep grand cherokee fuse box diagram, I can not read the one in the box itself?
Submitted: 6 years ago.
Category: Jeep
Expert:  Chad replied 6 years ago.
Actually there are 3 for that....
JO1 is 40 amp
JO3 is 40 amp
M14 is 20 amp
Customer: replied 6 years ago.
Thanks, XXXXX XXXXX I tell which fuse controls the trailer winch? The connector I have that fits the standard 7 pin trailer connection on the Jeep, has only has a 2 pin connector for the winch on the other end. If I had a readable diagram to locate the three fuses above I could remove them one at a time and check for voltage at the two pin connector. Where can I get a printed fuse box diagram?. Can I fit a 60 amp fuse in the fuse holder?
Expert:  Chad replied 6 years ago.
Under the lid of the TIPM should be a picture of all fuses and relays in it With the locations printed on it.
Expert:  Chad replied 6 years ago.
In the 7 pin connector pin 2 is ground and pin 5 is B+.
Expert:  Chad replied 6 years ago.
Fuse J03 40 amp fuse is the Bat + at pin 5 of 7 way trailer tow connector
Chad and 3 other Jeep Specialists are ready to help you