How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask a dodgetech Your Own Question
a dodgetech
a dodgetech, Technician
Category: Jeep
Satisfied Customers: 621
Experience:  Chrysler Master Tech 15+ Years of A/C and Electrical and Body Mechanical
17611435
Type Your Jeep Question Here...
a dodgetech is online now
A new question is answered every 9 seconds

2003 jeep grand Cherokee: You change the headlight bulbs

Resolved Question:

How do You change the headlight bulbs on a 2003 jeep grand Cherokee?   
Thank you for your help
Dave
Submitted: 8 years ago.
Category: Jeep
Expert:  a dodgetech replied 8 years ago.

REMOVAL

Fig.15 Headlamp Jackscrew

  1. Remove the jack screw attaching the top of headlamp to the headlamp mounting module.

Fig.15 Headlamp Removal

  1. Grasp upper inboard and lower outboard corners of headlamp and pull headlamp outward.
  2. Remove all of the bulb sockets from headlamp module.
  3. Separate the headlamp from vehicle.

INSTALLATION

CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.

  1. Install all of the bulb sockets in headlamp module.
  2. Position the headlamp on the vehicle and align the ball studs with the sockets.
  3. Push the headlamp inward to secure the ball studs with the sockets.
  4. Install the jack screw attaching the top of headlamp to the headlamp mounting module.
a dodgetech and other Jeep Specialists are ready to help you