35,890 satisfied customers
Specialities include: Automotive Mechanic, Small Engine Repairs, Auto Body Repairs, Diesel Engine Repairs
Hello, my name is ***** ***** to just answer! I will be assisting you with all of your vehicle questions today. Let's get started!.. Have you checked High and low side pressures?
1. Disconnect fan and using a fused power supply apply power and ground, fan should run.
2. Check for power on the Green/Orange and the Red/Black wires on the fan control module.
3. Check for a good ground on the Black/Red wire.
4. Check for a pulse width modulated ground signal from the Engine Control Module (ECM) on the White/Blue wire when the engine gets hot. Jaguar does not provide an exact specification, only that it should be on between 180 and 245 degrees.
5. Fans should be activated any time pulse width or dwell are between 7 and 95%. Also, if pulse width is below 3% or above 95%, fans will run at max speed.
6. If signal is good and powers and grounds are present but there is no output to the fans, then the Fan Control Module is bad.
35,890 satisfied customers
Ellen
Licensed mechanics