How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt Your Own Question
Matt, Engineer
Category: Jaguar
Satisfied Customers: 394
Experience:  Mechanical Engineer with 20 years experience in the auto industry, 8 yrs in formula 1 engine testing
Type Your Jaguar Question Here...
Matt is online now
A new question is answered every 9 seconds

I have a 2011 Jaguar XF vin S08177. I had srs module reset

Customer Question

I have a 2011 Jaguar XF vin S08177 . I had srs module reset by a federally licensed company in N. Carolina. Original crash was a left side impact. .Front air bags were not fired. I swept the wiring , no shorts or opens. When ignition is turned on, the air bag system throws faults B1194 and B1195 . Tried changing front impact sensors, same result. Codes can be cleared, but when vehicle is turned off, and then turned back on it throws the same codes.My other vehicle is a 2012 XF vin S050317. I put in a newsrs mmodule from Jaguar, acompany in Texas programmed the vin into the new module. Original crash wash left front and drivers airbag deployed. I swept the wiring on this one also, no shorts or opens. When ignition is turned on B0090 and B0095 are codes set. They can not be reset. Also occaisionally see codes B0001 and B0002. Any Ideas?
Submitted: 2 months ago.
Category: Jaguar
Expert:  Richard replied 2 months ago.
On the 2011 was the srs module replaced?What tool are you using to read the codes?
Customer: replied 2 months ago.
No it was cleared. Diagun $ 2000.00 code reader