How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Your Own Question
Richard, Jaguar Technician
Category: Jaguar
Satisfied Customers: 15545
Experience:  12 years at a Ford/Lincoln Mercury and Jaguar dealer as technician and shop foreman.
Type Your Jaguar Question Here...
Richard is online now
A new question is answered every 9 seconds

No Rpm signal on a XJ8 2004 JA: Sometimes things that you

Customer Question

No Rpm signal on a XJ8 2004
JA: Sometimes things that you think will be really complicated end up being easy to fix with Jaguar. The Jaguar Mechanic I'm going to connect you with knows all the tricks and shortcuts. Tell me a bit more about what's going on so he can help you best.
Customer: Car was towed in to another shop. No start. they replace crankshaft sensor. No RPM signal
JA: Are you hoping to fix this yourself?
Customer: What does that mean??
JA: Is there anything else important you think the Jaguar Mechanic should know about your Jaguar?
Customer: no
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Jaguar Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Jaguar
Expert:  Kevin replied 1 year ago.
Hi im kevin how can we help do you just want clarification on the meaning of no rpm ?
Customer: replied 1 year ago.
The crankshaft sensor was replaced. No start condition
Expert:  Kevin replied 1 year ago.
Ok and how has it been confirmed that you have no rpm signal ? Fault code ?
Customer: replied 1 year ago.
The owner wash his engine and failure ac-cured afterward.
Customer: replied 1 year ago.
I hook up my scanner
No rpm on data
Expert:  Kevin replied 1 year ago.
ok im gonna opt out on this one my info is limited another tech will assist
Expert:  Richard replied 1 year ago.
I would first check the pollen filter housing to make sure it is not full of water. If so then dry out the area and disconnect the ECM to make sure the electrical connector pins are not damaged. We also need to check the fuses in the engine compartment fuse box. Let me know.