How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt Your Own Question
Matt, Engineer
Category: Jaguar
Satisfied Customers: 394
Experience:  Mechanical Engineer with 20 years experience in the auto industry, 8 yrs in formula 1 engine testing
Type Your Jaguar Question Here...
Matt is online now
A new question is answered every 9 seconds

Mr I have a 2006 Jaguar s-type 4.2 I had to replace the

Customer Question

Hello Mr Richard I have a 2006 Jaguar s-type 4.2 I had to replace the thermostat housing and thermostat now is running hot how do I bleed the cooling system?
Thanks in advance
Submitted: 2 years ago.
Category: Jaguar
Expert:  Richard replied 2 years ago.

I actually vacuum fill these with a tool. Since you most likely do not have this remove the small bleeder screw on the coolant tank and fill the system with a 50/50 mix of the Jag coolant and water til no air bubbles come out of the bleeder. Reinstall the bleeder and fill the tank.