How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Your Own Question
Richard, Jaguar Technician
Category: Jaguar
Satisfied Customers: 15545
Experience:  12 years at a Ford/Lincoln Mercury and Jaguar dealer as technician and shop foreman.
Type Your Jaguar Question Here...
Richard is online now
A new question is answered every 9 seconds

Jaguar S Type Jaguar S Type Bluetooth Enable Dialing Pad for

Customer Question

Jaguar S Type Bluetooth Enable Dialing Pad for code installation
Submitted: 6 years ago.
Category: Jaguar
Expert:  Richard replied 6 years ago.
Hello and welcome to

First press the phone button on the audio unit and press ##3#*#. Use your phone to find a bluetooth device. Select Jaguar and the pass code is 1313.
Richard and 3 other Jaguar Specialists are ready to help you
Customer: replied 6 years ago.

After Pressing the Phone Button " No Phone Appears on Screen but as soon as you try to enter ##3#*# XXXXX Reverts Back to the radio station. However if I receive a call while in the Car the call sound is present but no talk contact.

Customer: replied 6 years ago.



Expert:  Richard replied 6 years ago.
Sorry for the delay. This tells me that bluetooth may not be fitted or there is a problem with the phone module in the boot. Lets do the fiber optic network test. Press and hold AM/FM and EJECT at the same time then release both and hit EJECT and MIX. Keep doing this and you will see the audio modules. It should say MAIN, CDC, AMP, PHONE,NAV... If it cycles through all the modules then the fiber optic network is working properly. If it just says MAIN then you have a problem with the network.