Have Industrial Equipment Repair Questions? Ask an Expert Now
Good morning sorry for delay
There are two micro switches that the shiftier lever trips to get forward and reverse, one must close and one must be open, if one is stuck or not working you will only get intermittent drive direction.
Use a Ohm meter to make sure they open/close while moving shiftier Note: the switches be wired N/O or N/Cso check how they are wired before disconnecting wires to replace switches, always replace both to avoid future issues
click here for pictures of micro switches used
Please use star rating system to rate my assistance so the website gives me credit for my time,, you may still follow up if needed at no extra charge
Just checking in to make sure you got this taken care of?Please use the star rating system at top of page so I get credit from the site for my time.Thank you