How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 28081
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
30244710
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

All of the wires on the auto level switch are disconnected,

Customer Question

All of the wires on the auto level switch are disconnected, which wires go where? 6000m skytrak everything works except tilt.
Submitted: 9 months ago.
Category: Industrial Equipment
Expert:  Curtis B. replied 9 months ago.

Hello! Let's see if we can can work together to get to the root of your question!

Expert:  Curtis B. replied 9 months ago.

Skytrak? model number? S/n? auto level switch at cab or? 6036 or 3606?

Customer: replied 9 months ago.
in cab. 6000m made for the military in the 90's similar to 6036 i think?
Expert:  Curtis B. replied 9 months ago.

wiring from typical skytrack

Customer: replied 9 months ago.
Not the same . I found the schematic for a 6000m ,doesn't show witch wire goes to witch position on the switch. Really can do without auto level with this switch disconnected won't allow tilt to work.
Expert:  Curtis B. replied 9 months ago.

Switch has to power the solenoids on the tilt valve, Look at the tilt solenoids and get wire colors, then see if same wires are on the auto level, wire auto level so the tilt solenoids are active when switch is on.

Related Industrial Equipment Questions