How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spankyjr1 Your Own Question
spankyjr1, Journeyman
Category: Industrial Equipment
Satisfied Customers: 2602
Experience:  I worked on all types of equipment semis,forklifts,farm,ect.
Type Your Industrial Equipment Question Here...
spankyjr1 is online now
A new question is answered every 9 seconds

I have a Maximal 3.0 lp forklift everything works but it

Customer Question

I have a Maximal 3.0 lp forklift everything works but it wont engage in reverse all of the sudden. Fluids are right. Any ideas????
Submitted: 10 months ago.
Category: Industrial Equipment
Expert:  spankyjr1 replied 10 months ago.

Hi Darin, Check to see if you have a a bad micro switch on gear shift linkage, if one is stuck open it can cause truck to move in only one direction

You can use a ohm meter to check that it switches from N/O to N/C when activated

click here for picture of common switches.

note the position of wires on switches as these can be wired either N/O or N/C

Please take the time to reply/Rate me with stars at top of page so I get credit from the site for my time..
Thank You!.

Related Industrial Equipment Questions