How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 693
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

We have a JLG 20N man lift and when it is lowering it

Customer Question

We have a JLG 20N man lift and when it is lowering it squeaks terribly. We cannot figure out where the grease fittings are on the oscillating arms that lift the platform. Help!
Submitted: 1 year ago.
Category: Industrial Equipment
Expert:  Bradley Martin replied 1 year ago.

Have you tries raising it all the way up and spraying some inner slide lube inside the channels or spray each channel as it is going up if that does not help may have a stuck roller I would look for shiny spots on the channels that will tell you where it is rubbing at