How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 28321
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

2006 Manitou forklift perkins engine I have fuel coming out

Customer Question

2006 Manitou forklift perkins engine I have fuel coming out the bleeder at the rail were the injector lines connect at the lower side of the fuel lines. The fuel will not come out to feed the line going up to the injectors.
JA: Can you guesstimate how old the engine is? And has it done anything like this in the past?
Customer: 2006 No
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: Drained fuel, replaced filer It has a primer ball. The fuel filter is full.
Submitted: 1 year ago.
Category: Industrial Equipment
Expert:  Curtis B. replied 1 year ago.

Primer pumps fuel out at the injector bleeder when pumped? Sounds like the fuel solenoid is not opening the passage to the injector high pressure lines. Is solenoid getting battery voltage? Is it opening? Perkins model number? 1000 series?

Customer: replied 1 year ago.
Can hear it click. Yes getting power
Expert:  Curtis B. replied 1 year ago.

Remove the solenoid, and remove the spring and tip, reinstall and see if it will start. be prepared to kill engine by shutting off the air, or the fuel supply if it starts. If it does not start, the injection pump has internal problems.

Customer: replied 1 year ago.
Pulled cylinoid. Cant remove pin one piece. When energized pin pulls in.
Customer: replied 1 year ago.
Silonoid is very hot
Expert:  Curtis B. replied 1 year ago.

It has to stay open continuously, does it stay retracted?

Expert:  Curtis B. replied 1 year ago.

If it does, the pump has internal problems,and is not pumping fuel.

Related Industrial Equipment Questions