How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne, Journeyman
Category: Industrial Equipment
Satisfied Customers: 9533
Experience:  worked on lift trucks, and IR air compressors
Type Your Industrial Equipment Question Here...
Wayne is online now
A new question is answered every 9 seconds

I have an Rand Compressor driven by a Deere Diesel Engine. I

Customer Question

I have an Ingersoll Rand Compressor driven by a John Deere Diesel Engine.
I need wiring diagram for the 24V Alternator.
S/N: *PE4045H622157*
Ingersoll Rand 380666ULQA57
XP 375WIR / 2007 / B
Submitted: 1 year ago.
Category: Industrial Equipment
Expert:  Wayne replied 1 year ago.

Hi I'm Wayne

I will help you with this

this site shows the JD 24 v diagram,

it applies to all JD alternators

I hope this helped you

click here

Hi if this helped you

Please rate my answer 3 or more stars

If need more info use the info button

Not Poor/Bad service

Expert:  Wayne replied 1 year ago.


Just a follow up with you

did my answer help you

let me know, please


Customer: replied 1 year ago.
Dear Wayne,First sorry regarding my late reply. Busy at work. Yesterday I had a chance to look at the machine. The schematic you send me is different than what I have. This 4045 Engine is on a Ingersoll Rand Compressor 375 cfm.
I do not have the wiring colors you are indicating....Wendel Jennie
Customer: replied 1 year ago.
Here the Tag Plates of Engine and Machine
Expert:  Wayne replied 1 year ago.


see if this helps you click here

Customer: replied 1 year ago.
Nope definately not the same wires.
Please look at pictures.
Expert:  Wayne replied 1 year ago.


I have to go out of town for 2 days

so I will opt-out and post back to the board

for another expert to help


Related Industrial Equipment Questions