How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 675
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
30244710
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

G'day I need to know where to test hydraulic pressure on a

Customer Question

G'day I need to know where to test hydraulic pressure on a TL250M-4 and the pressure required in the system Unable to find test points location.As we have a problem with the boom retraction it will not move the extend is OK and it moves out
Submitted: 1 year ago.
Category: Industrial Equipment
Expert:  Bradley Martin replied 1 year ago.
Hello How does your boom lubrication look? it sounds like your boom does not have proper lubrication
Customer: replied 1 year ago.
No all good only function not working is boom/jib retract and don't know where to fit test fitting to test hydraulic pressures
Expert:  Bradley Martin replied 1 year ago.
Ok let me see what I can come up with can you wait until monday
Customer: replied 1 year ago.
I'm in Western Australia and we would like to get it going tomorrow it's 10:16 pm now not sure where you are
Thanks
Expert:  Bradley Martin replied 1 year ago.
United states I will see what I can find on this info might not be available over here but I will see what I can find

Related Industrial Equipment Questions