How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 675
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
30244710
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

My tb42 snorkel lift does not have enough power to load on a

Customer Question

my tb42 snorkel lift does not have enough power to load on a trailer
Submitted: 1 year ago.
Category: Industrial Equipment
Expert:  Bradley Martin replied 1 year ago.

Do you have it in low speed?

Customer: replied 1 year ago.
Expert:  Bradley Martin replied 1 year ago.

The spool might not be pulling in all the way you can open the door on the hydraulic tank side and there are a bunch of spools laying horizontal and you can get a small seal pick or something and manually I can remember which one is drive but you should be able to figure it out when you press in the middle of the spool

Expert:  Bradley Martin replied 1 year ago.

Any update yet?

Customer: replied 1 year ago.
How do I find the correct valve for the travel and also do I need to push the valve while in motion? Which end do i push on?
Expert:  Bradley Martin replied 1 year ago.

If I remember right you will need to push it in towards the enginpush in the little pin in the middle of number 8 on the picture I sent

Expert:  Bradley Martin replied 1 year ago.

Were you able to get it on the trailer ?

Expert:  Bradley Martin replied 1 year ago.

Any update today?

Related Industrial Equipment Questions