Industrial Equipment

Have industrial equipment repair questions? Ask an Expert now

Ask an Expert,
Get an Answer ASAP!

I have a 1996 genie s60 that I'm having trouble with the…

Customer Question
I have a 1996...
I have a 1996 genie s60 that I'm having trouble with the basket control for swinging to the right and platform rotate to the right .these functions work fine from the ground controls.when I try to swing right from the basket I can hear the motor bog down so I know it's getting the command but the valve isn't opening. It is actually causing a leak at the terret where all the lines go into a canister looking thing.
Submitted: 2 years ago.Category: Industrial Equipment
Show More
Show Less
Ask Your Own Industrial Equipment Question
Answered in 4 minutes by:
2/23/2016
Mechanic: Curtis B., Technician replied 2 years ago
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 31,907
Experience: Technican turned service manager on multiple lines of equipment used in industry.
Verified

Canister is a rotary manifold. It sounds like it has damaged seals between the sections. The only repair is to remove it and reseal or replace it!

Ask Your Own Industrial Equipment Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Curtis B. Your Own Question
Curtis B.
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 31,907
31,907 Satisfied Customers
Experience: Technican turned service manager on multiple lines of equipment used in industry.

Curtis B. is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Curtis B.

Curtis B.

Technician

31,907 satisfied customers

Technican turned service manager on multiple lines of equipment used in industry.

Wayne

Wayne

Journeyman

222 satisfied customers

worked on lift trucks, and IR air compressors

Cat Man

Cat Man

Cat Engine Expert

216 satisfied customers

I am ASE Master Certified.

cumminsdr

cumminsdr

Mechanic

26 satisfied customers

Cummins Field Tech

Jeremy

Jeremy

Technician

18 satisfied customers

ASE Medium/Heavy Duty Technician, Hydraulics, Brakes, Electrical Certified

dieseldan55

dieseldan55

Mechanic

17 satisfied customers

Road service Mechanic for Volvo Construction Equipment

spankyjr1

spankyjr1

Journeyman

132 satisfied customers

I worked on all types of equipment semis,forklifts,farm,ect.

< Previous | Next >

Related Industrial Equipment Questions
I have a z34/22n Electric lift where there are no visible
I have a z34/22n Electric lift where there are no visible fluid leaks but everything works except the basket swivel/rotator function. I recently replaced the rotating cylinder below basket but basket … read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,907 satisfied customers
I have a 2008 S60 Genie Lift. Wont drive, steer, lift, or
I have a 2008 S60 Genie Lift. Wont drive, steer, lift, or rotate from the platform. everything else works. I can lift and rotate from the base. … read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,907 satisfied customers
I have a t350 jlg manlift. 2008. Today I went up and I was
I have a t350 jlg manlift. 2008. Today I went up and I was not able to telescope the boom. All functions work well from the ground but it won't telescope from the bucket? But all other functions work … read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,907 satisfied customers
Fabtek/hyester t40 Aerial lift ser#4337 won't swing left.
Fabtek/hyester t40 Aerial lift ser#4337 won't swing left … read more
Dan
Dan
Auto Mechanics 1&2/diesel mech
Sorry, im back. im the guy with the steering problwem on a
sorry, im back. im the guy with the steering problwem on a genie 30/20 … read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,907 satisfied customers
I have a 1996 Terex tb60. I don't have any manuals for it. I
I have a 1996 Terex tb60. I don't have any manuals for it. I looked at the online parts manual to find the CB valve on the boom lift cylinder which is leaking. I'm assuming that valve is threaded. Is my assumption correct? Where can I purchase that valve? … read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,907 satisfied customers
I have acquired a 2004 Genie TZ 34-20 Electric Tow Behind
I have acquired a 2004 Genie TZ 34-20 Electric Tow Behind Boom Lift and had to go through the ops manual to get back to mfgr setup operation, however, at this point the problem exists with the basket … read more
Wayne
Wayne
Journeyman
Vocational, Technical or Trade Scho
222 satisfied customers
How do you remove swivel motor at basket to fix leak got
How do you remove swivel motor at basket to fix leak got basket off remove set screws far as we can go can't open to repair seals S-40 Genie serial 2048… read more
Bradley Martin
Bradley Martin
16 satisfied customers
Genie Z34/22N power at motor controller, no operating
Genie Z34/22N power at motor controller , no operating functions from ground or basket ? Problem started with no drive functions , replaced motor controller , now no functions ???… read more
Bradley Martin
Bradley Martin
16 satisfied customers
I have a 2005 Genie z45/25j. Serial #z45250526051. The steer
I have a 2005 Genie z45/25j. Serial #z45250526051. The steer function on the steer/drive control was jerky and after you let go of the control it would still move until you moved the control slightly … read more
Dan
Dan
Auto Mechanics 1&2/diesel mech
Genie Z boom z45/22 with Ford Engine. Plate Form Controls
Genie Z boom z45/22 with Ford Engine. Plate Form Controls work when the switch is in ground control mode.… read more
Bradley Martin
Bradley Martin
16 satisfied customers
I have a 2006 Genie GS-3268 RT scissor. The platform does
I have a 2006 Genie GS-3268 RT scissor. The platform does not seem to be raising properly. If you stop raising and then try to go again, it will barely go up. I notice that if I shut down the machine … read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,907 satisfied customers
,Have a Marklift MH10. When the platform is raised
, Have a Marklift MH10. When the platform is raised even the slightest it will only creep in the forward and reverse directions, to the point that I can stop it from moving just by holding against the… read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,907 satisfied customers
I have 2 lifts giving me problems. First is a Genie gs2032.
I have 2 lifts giving me problems. First is a Genie gs2032. It lifts fine from ground controls with no weight on the platform, but when I'm on the platform, it only goes up about 4 feet and cuts out. … read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,907 satisfied customers
older m 20st marklift scissor lift. wheels move forward and
older m 20st marklift scissor lift. wheels move forward and back. wheels will not turn right or left.,also will not raise. all switches seem to work. hyd. motor is running when try to raise or turn wh… read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,907 satisfied customers
My CH20NEP will not raise from either the platform controls
My CH20NEP will not raise from either the platform controls or the base control. Hydrualic pump runs 22 VDC at solenoid coil when switch is engaged. Coil shows 0 resistance on capacitance test.… read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,907 satisfied customers
On a genie tmz-50/30. The funtions get different voltgage.
On a genie tmz-50/30. The funtions get different voltgage. 0 to 6 volts. What could be wronge?… read more
spankyjr1
spankyjr1
Journeyman
Vocational, Technical or Trade Scho
132 satisfied customers
We have a Terex TS26. Worked fine for some time, but now is
We have a Terex TS26. Worked fine for some time, but now is not working properly. Symptoms: The only working function from the platform is steering, left or right, no problem. But, when trying to rais… read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,907 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x