Industrial Equipment

Have industrial equipment repair questions? Ask an Expert now

Ask an Expert,
Get an Answer ASAP!

I have a Olympian D100P1 Generator with a Perkins Engine.

Customer Question
Does this unit have mechanical...
I have a Olympian D100P1 Generator with a Perkins Engine.
Does this unit have mechanical control or is it an electronic controlled engine?
If it is Electronic what buss does it run.
Submitted: 2 years ago.Category: Industrial Equipment
Show More
Show Less
Ask Your Own Industrial Equipment Question
Answered in 1 hour by:
2/9/2016
Mechanic: Curtis B., Technician replied 2 years ago
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 31,842
Experience: Technican turned service manager on multiple lines of equipment used in industry.
Verified
Ask Your Own Industrial Equipment Question
Mechanic: Curtis B., Technician replied 2 years ago

This one shown on the enclosed video is a mechanical injected engine , Not electronic. Do you have a no start? Engine cranking over but does not run? The fuel injection pump has an electric fuel shutoff solenoid. Does it get battery voltage and does it click like it is opening.?

Ask Your Own Industrial Equipment Question
Customer reply replied 2 years ago
I understand this engine has a Woodward injector pump controller which is electronic and has an on board computer (logic unit).
it requires a "run" command (or contact closure ) to start and also has a programmed in overspeed shutdown.
It is an LC-50 series unit.
I was able to locate this information on line. Thanks for your help.
Mechanic: Curtis B., Technician replied 2 years ago

OK> Let me opt out. I know nothing about it! Maybe someone else can help.

Ask Your Own Industrial Equipment Question
Customer reply replied 2 years ago
Thanks,
I think i was able to find the information i needed.
No further help is necessary.
Take your basic fee but dont charge me for the rest.
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Curtis B. Your Own Question
Curtis B.
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 31,842
31,842 Satisfied Customers
Experience: Technican turned service manager on multiple lines of equipment used in industry.

Curtis B. is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Curtis B.

Curtis B.

Technician

31,842 satisfied customers

Technican turned service manager on multiple lines of equipment used in industry.

Wayne

Wayne

Journeyman

222 satisfied customers

worked on lift trucks, and IR air compressors

Cat Man

Cat Man

Cat Engine Expert

216 satisfied customers

I am ASE Master Certified.

cumminsdr

cumminsdr

Mechanic

26 satisfied customers

Cummins Field Tech

Jeremy

Jeremy

Technician

18 satisfied customers

ASE Medium/Heavy Duty Technician, Hydraulics, Brakes, Electrical Certified

dieseldan55

dieseldan55

Mechanic

17 satisfied customers

Road service Mechanic for Volvo Construction Equipment

spankyjr1

spankyjr1

Journeyman

132 satisfied customers

I worked on all types of equipment semis,forklifts,farm,ect.

< Previous | Next >

Related Industrial Equipment Questions
We have 2003 Olympian/Perkins Generator Set without ECM, i
Hi, We have 2003 Olympian/Perkins Generator Set without ECM, i mistakenly got a new ECM not from Olympian dealer, now i need the Flash File -(2433091-00 for 2806C-E16 Olympian Engine) to program it. A… read more
Jeremy
Jeremy
Technician
Associate Degree
18 satisfied customers
I have a Cat 80KW generator with a Perkins diesel engine.
I have a Cat 80KW generator with a Perkins diesel engine. 3362/1800. It was running fine then it died. Changed the oil, fuel filters, and air filters. Changed three relays behind the control panel. It… read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,842 satisfied customers
CatMan are you able to find me the engine perfomance specs
Hi CatMan are you able to find me the engine perfomance specs for a perkins,cat C6.6 serial:66605338?… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
216 satisfied customers
I have a Olympian generac diesel generator. The engine runs
I have a Olympian generac diesel generator. The engine runs great but the generator is making a grinding noise. Any ideas what is causing that? … read more
Jeremy
Jeremy
Technician
Associate Degree
18 satisfied customers
Need to know motor size ih hyster 100 pirkins hyster sea.
need to know motor size ih hyster 100 pirkins hyster sea. f5a 2434g … read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,842 satisfied customers
I have a 4 cyl perkins engine in my hystrer forklift and it
I have a 4 cyl perkins engine in my hystrer forklift and it will start up and run some times for a couple minutes as much as 5 minutes and other times for 30 to 40 second. While running has no acelera… read more
Dan
Dan
Auto Mechanics 1&2/diesel mech
I am searching manual Ford New Holland Model # ***** Unit
I am searching for a manual for a Ford New Holland Model # ***** Unit XZ117 Serial Number 12115XUA2001A2*.… read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,842 satisfied customers
I have a customers Olympian CD015 diesel generator that
I have a customers Olympian CD015 diesel generator that starts and runs fine on manual however in automatic mode it starts up and runs however it keeps engaging the starter and glow plugs.… read more
Bradley Martin
Bradley Martin
16 satisfied customers
Looking perkins 3.09 engine. this engine was used on a
looking for parts for a perkins 3.09 engine. this engine was used on a Lincoln welder. I want to use it to run a generator since it is rated at 3600 rpm… read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,842 satisfied customers
I have a 2007 JCB 520 Loadall 4x4 forklift that needs a ring
I have a 2007 JCB 520 Loadall 4x4 forklift that needs a ring gear. Where do I get the best deal on parts and what is the best way to put it in. We plan to do the work ourselves so any advice you may h… read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,842 satisfied customers
I am trying to remove the fuel injection pump from a Perkins
I am trying to remove the fuel injection pump from a Perkins 1004.42 and it has a Lucas/Delphi pump. How to set timing before removing the pump?… read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,842 satisfied customers
my perkins 1300 series 250kva genset with electronic control
my perkins 1300 series 200kva genset with electronic control module has the following problem: it starts well, but immediately shuts down on UNDER VOLTAGE when you load it. the load is a 75 kw centrif… read more
Expert
Expert
I have a perkins engine on a stationary fire pump that requires
I have a perkins engine on a stationary fire pump that requires a new coolant temperature sensor to keep the block heater pump running it seems to be about 3/4 inch diameter screwed into the block… read more
Dan
Dan
Auto Mechanics 1&2/diesel mech
what are the valve settings for a sd80 sellick?? unit is a
what are the valve settings for a sd80 sellick?? unit is a 1994 model and what model perkins engine is in this unit???… read more
Curtis B.
Curtis B.
Technician
Associate Degree
31,842 satisfied customers
I have a Cummins/Onan Genset Model C550D5 Serial#C05K569100.
I have a Cummins/Onan Genset Model C550D5 Serial#C05K569100. I am trying to get the unit up and running. It was purchased at auction not running. I have the Insite software for the engine but not InPo… read more
cumminsdr
cumminsdr
Mechanic
High School or GED
26 satisfied customers
I have a 2806a-e18tag2 perkins engine that runs a 660 kva generator
I have a 2806a-e18tag2 perkins engine that runs a 660 kva generator it ran low on oil and shut off. Now it only runs for a few seconds and shuts off. Any Ideas?… read more
spankyjr1
spankyjr1
Journeyman
Vocational, Technical or Trade Scho
132 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x