How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne, Journeyman
Category: Industrial Equipment
Satisfied Customers: 9429
Experience:  worked on lift trucks, and IR air compressors
Type Your Industrial Equipment Question Here...
Wayne is online now
A new question is answered every 9 seconds

Tz50 2005 my jib will only lift part way

Customer Question

tz50 2005 my jib will only lift part way
Submitted: 1 year ago.
Category: Industrial Equipment
Customer: replied 1 year ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  Wayne replied 1 year ago.

Hi I'm Wayne

I see you been waiting a long time

do you still need help with this

let me know

Customer: replied 1 year ago.
i do
Expert:  Wayne replied 1 year ago.


is the fluid full,

did you change the filter

does the motor make a whine sound when it stops going up

let me know ,Please

Customer: replied 1 year ago.
HI Wayne yes the fluid is full I did not change the filter yes the electic motor still whines
Expert:  Wayne replied 1 year ago.

Thank you for that

Ok , that says that is starving for fluid,

replace the filter , may be clogged , or you are sucking air from intake hose

check all fittings for seepage on intake side

I hope this helped you

Hi if this helped you

Please rate my answer 3 or more stars

If you need more info, use request button

Not Poor/Bad service


Expert:  Wayne replied 1 year ago.


I am just following u with you

did my answer help you

Let me know ,Please


Customer: replied 1 year ago.
hi wayne i changed m filter today did not help . tommorw i will spray around all fittings to look for bubbels.
Expert:  Wayne replied 1 year ago.


Thank you for that

if the motor is whining and struggling to go up

filter changed , it is sucking air or pump is weak

run a hose from the pump to a 5gal pail of fresh clean oil see

what happens, if goes up, then you know pump is good

Hope this helped you

Related Industrial Equipment Questions