How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 28088
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

How do you get the motor separated from the generator on a

Customer Question

how do you get the motor separated from the generator on a 110 kw
Submitted: 1 year ago.
Category: Industrial Equipment
Expert:  Curtis B. replied 1 year ago.

Generator will be coupled to the engine with a drive place, have you removed the bolts from drive plate to flywheel? Usually there will be cover on the engine end of the generator that would give access to the drive bolts, would take to remove one, turn engine till next bolt is exposed, repeat until all bolts are removed, without model number, can not be exact! Or can you post pictures?

Customer: replied 1 year ago.
theres nothing wrong with the mechanic however your system to charge for everything gets a little to expensive.
Expert:  Curtis B. replied 1 year ago.

One charge does all, expect phone . So for us to continue on computer is the 18 dollars total. Can you send picture?

Customer: replied 1 year ago.
I don't see any plate to remove to gain access to the bolts
Expert:  Curtis B. replied 1 year ago.

Bolts an be from flywheel side back toward generator, Through starter hole, or other plate on engine flywheel housing. Has to be a way to unbolt the drive plate!

Customer: replied 1 year ago.
Here are pics of the generator (110kw) and the attached label.
Expert:  Curtis B. replied 1 year ago.

I can't help. Sorry, I will opt out.

Related Industrial Equipment Questions