How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spankyjr1 Your Own Question
spankyjr1, Journeyman
Category: Industrial Equipment
Satisfied Customers: 2621
Experience:  I worked on all types of equipment semis,forklifts,farm,ect.
Type Your Industrial Equipment Question Here...
spankyjr1 is online now
A new question is answered every 9 seconds

I replaced the encoder on a Yale electric Forklift, and

Customer Question

Hello This is Vincent. I replaced the encoder on a Yale electric Forklift, and still have a code 52 Str encoder fault, and now have a code 242 handle com.error. got any ideas?
Submitted: 2 years ago.
Category: Industrial Equipment
Expert:  spankyjr1 replied 2 years ago.

Hi Vincent,, You could have replied on the other question,, I don't know if you are a subscription customer or not?

If you are let me know.

The end coder needs to be calibrated,, do you have the part number or some pictures of it on motor,, my memory is fuzzy on calibrating,, maybe seeing it will trigger it getting old you know

After installing new coder, with wheel of the ground, turn on and go stop to stop both direction,, then power down

I'm just pasting truck info below so I don't have to search old question and you don't have to type over again.