How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 703
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
30244710
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Curtis. I have a 1969 EC 25 forklift. The brushes have gone

Customer Question

Hi Curtis. I have a 1969 Clark EC 25 forklift. The brushes have gone bad on the pump motor for the lift. I am told the motor has 8 brushes and that I will have to pull the motor to replace the brushes and in order to do that I will have to pull the motor. Could you tell me how hard it is to pull the motor on one of these. At least the motor is exposed after dropping the lower panel. Thank you in advance for your advise. Ralph PAquin
Submitted: 2 years ago.
Category: Industrial Equipment
Customer: replied 2 years ago.
I am all set no need to respond. Thanks
Expert:  Curtis B. replied 2 years ago.

pMA 436

Expert:  Curtis B. replied 2 years ago.

http://service.clarkmhc.com/Serv_Manuals/